POP has a very slow photographic speed, that is you need quite a lot of light to make an image, so much so that it can be handled for short periods under indoor lighting.
The normal method for printing an image is to put the paper into a printing frame (I used a photo frame) and contact print negatives by placing them on the paper so they are sandwiched between the glass and paper–this keeps them nice and flat.
What you see above is all the equipment you need to make a print, the only extra things you'll need are a tray of water and sunlight.
Firstly in subdued light place the negative into the frame and lay the POP emulsion side down against the neg, then snap the back of the frame in to hold the paper agaist the negative–you may even like to put some card packing in to hold the negative against the paper.
I am using a 4x5 negative in order to give a good image size, negatives can be made from any image by inverting B&W images in photoshop and printing on transparent film
The next step is to place the frame outside in sunlight, I have found that a bright slightly overcast day gives the best results, trial and error being the best method of exposure, my times are normally between 5-15min the shorter time would be in bright light the later in open shade.
When taken from the framethe tones can be anything between yellow-red to purple-brown, and in this state the photograph isn't stable, that is bright light will fog it.
In order to 'develop' the print it must first be briefly washed to remove the excess silver nitrate which gives the image a better stabilty, and also causes the image to turn yellow/red and become slightly lighter.
The resulting image can be fixed in plain hypo for further image permanence this can further lighten the print and change colour.
My personal preference is for the plum colour, and I have scanned the image straight out of the frame to keep a digital record.
It should be noted that since I bought this paper that Kenmere have discontued it, if you would like to try it you'll have to make your own paper or try the similar modus of cyanotype like papers made by this toy company I feel another blog post coming on....